SSP MGA701 Manual Del Usuario página 10

Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
WA
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model MGA701
Work mode: surface grinding
Vibration emission (a
h,AG
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
Work mode: disc sanding
Vibration emission (a
h,DS
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
emission value may be different.
Model MGA901
Work mode: surface grinding
Vibration emission (a
h,AG
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
Work mode: disc sanding
Vibration emission (a
h,DS
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
emission value may be different.
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for main
applications of the power tool. However if the power
tool is used for other applications, the vibration
emission value may be different.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: MGA701, MGA901
are of series production and
10
All manuals and user guides at all-guides.com
ENG905-1
): 90 dB (A)
pA
): 101 dB (A)
ENG900-1
2
): 5 m/s
2
2
): 2.5 m/s
2
2
): 5 m/s
2
2
): 2.5 m/s or less
2
ENG902-1
ENH101-15
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
28. 9. 2010
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN