Oxygenics BodyBar+TiTan Instrucciones De Instalación

B B
ody ar
EASY INSTALLATION
INSTRUCTIONS
STEP 1 STEP 2
To remove your existing Remove any remnants of
shower head turn the old plumber's tape and flush
existing shower head in a out shower pipe for 5 to 10
counterclockwise direction. seconds. Wrap plumber's tape
clockwise 3 or 4 turns around
threaded end of shower arm.
STEP 4 STEP 5
In a clockwise direction, Thoroughly clean area
screw fixed unit onto where Easy Slide Bar will
the taped portion of the be applied.
diverter and hand tighten.
STEP 7
Place BodyBar in desired
location within shower.
Press and hold firmly in
place for 30 seconds.
HOW TO SWITCH
SPRAY SETTINGS
The easy spray selector
allows you to click with
ease to your desired
spray setting.
ATTENTION:
WASHERS PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted into both hose
ends for proper installation.
+ T
iTan
STEP 3
Screw the diverter
clockwise onto the taped
portion of the shower arm.
Wrap plumber's tape 3
turns around threaded ends
of the diverter.
STEP 6
Carefully remove covering
from adhesive strips. Use
caution as adhesive is
extremely powerful.
STEP 8
Attach hex nut end of
hose to diverter and hand
tighten. Attach conical nut
end of hose to BodyBar
and tighten.
USING THE DIVERTER
To change the shower spray: Place your index
finger on one lever and your thumb on the
other lever and rotate
either clockwise or
counter clockwise
(depending on the
current position) until
you feel it click into
place.
WARNING:
ADHESIVE IS EXTREMELY STRONG
AND WILL STICK ON CONTACT.
Oxygenics is not responsible for any injury or damage resulting
from improper installation, use, or removal of the BodyBar..
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
1.775.420.5600
or
Support is also available via email at
support@oxygenics.com
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.