Installation Instructions; General Remarks - Reggiani MORPHY Manual De Instrucciones

MORPHY

INSTALLATION INSTRUCTIONS

• Lighting fixtures for indoors and outdoors, suitable for mounting
on normally inflammable surfaces (*) as marked on the fixture
with symbol
(*) The temperature of the mounting surface in direct contact with
parts of the fixture does not exceed 90°C.
Standards/directives compliance: EN 60598-1, EN 60598-2-1
/ LVD 73/23, EMC 89/336 and EEC 93/68.
• Protection degree: IP55.
• Versions: One, two, three sectors.
• Applications: Ceiling, surface mounting, on rigid suspension
bracket, room corners and surface edges.
• Installation height: Universal.
• Orientability: 356° horizontally for all sectors and relative
reflector (90° one-sector fluorescent fixture).
• Light sources: Metal halide double-ended lamps, mains voltage
linear halogen lamps, compact fluorescent lamps.
• Light distribution: Asymmetric.
• Voltage supply to lamps: Conventional electromagnetic ballasts
(cos =0.95) for metal halide and compact fluorescent lamps,
mains voltage for linear halogen lamps.

GENERAL REMARKS

• All fixtures are of class I (connection to earthing conductor
compulsory) and are provided with a non-detachable mains
cable of type H05RN-F, cross section 1mm
connecting device mounted in a thermoplastic box which,
together with cable entry and outlet, has an IP protection degree
equal or greater than that of the fixture itself (dwg.
The connecting device, thermoplastic box and any connection
accessories are to be provided by the installer. Current electrical
installations regulations should be duly observed when choosing
the materials and connection methods.
• The number enclosed in the symbol
distance at which the object to be
illuminated should be placed. Such distance should be measured
along the optical axis of the object to be illuminated, from the
lamp to the nearest object lit up. N.B. : Some objects may lose
their colours when exposed for a long time to artificial lighting.
In order to guarantee a good safety level and a longer exposure
time, it is highly recommended to replace normal safety glasses
with UV-protection filters and/or use UV-limited lamps already
available on the market.
ENGLISH
F
.
indicates the minimum
0,8m
6
. Use a suitable
2
). N.B.:
MORPHY