Maintenance - PANCONTROL PAN IR-T380 Manual

All manuals and user guides at all-guides.com
Temperature measurement °C/°F
1. Hold the measuring device using the handle and point it at the test object.
2. Press the test button (trigger) to switch on the device and to start the
measurement process.
3. If the battery is not empty, the display switches on and shows the
measured value. If not, please change the battery.
4. If you release the test button (trigger), HOLD is shown in the display.
5. The meter turns off automatically after 8 seconds.
6. If "- - - -" is displayed while measuring the value exceeds the used range.
Press the MAX/MIN button to display the MAX/MIN values at fluctuating
temperatures.
Press the ° C / ° F button to toggle between Celsius and Fahrenheit.
Press the measuring button (trigger)
Press the LASER / backlight
- once: Laser is turned on (laser symbol lights up in the display)
- twice: background lighting is turned on.
- three times: Laser is turned off.
- four times: Laser and backlight will be turned off.
The measuring device automatically compensates the ambient temperature.
This may take upto 30 minutes in case of large temperature differences.

9. Maintenance

Only authorized service technicians may repair the instrument.
Note: If the instrument is malfunctioning, please test:
- Battery condition and polarity
- Condition of the fuse(s) if available.
EN 7