New Hardware Found; Audio; Agp - EUROCOM D40EV IMPRESSA Manual Del Usuario

Concise User's Guide

New Hardware Found

If you see the message "New Hardware Found" (Found New
Hardware Wizard) for the Universal Serial Bus (USB) Con-
troller during the installation procedure, click Cancel to close
the window, and follow the installation procedure as directed.
Wireless Module ON/OFF Switch
While installing the drivers make sure that the Wireless
Module ON/OFF switch is turned OFF, until you come to
install the drivers for the 802.11b Wireless LAN or Bluetooth
modules. Before installing the 802.11b Wireless LAN or
Bluetooth drivers turn the switch ON. If you have both the
802.11b Wireless LAN and Bluetooth modules, use the Fn +
F12 key combination to toggle the power to the module(s). If
the Found New Hardware Wizard appears at any time (oth-
er than outlined in the driver install procedure), click Cancel.
Driver Installation and Multi Language Options
Make sure you have not enabled any of the Multi language
options in the Regional and Language Options control
panel before installing the drivers. Some of these language
options will interfere with the audio driver installation pro-
cess. After you have installed all the drivers you may then
configure the language options.
24 - Driver Installation
All manuals and user guides at all-guides.com
!
Audio (WinXP)
1. Click Start (menu) > Run
2. Navigate (Browse...) to
D:\Drivers\00Audio\Setup.exe and click OK > Next.
3. Click Finish to restart your computer.
4. You can click the AC97 Audio Configuration icon
the taskbar for further configuration options.
AGP (WinXP)
1. Click Start (menu) > Run
2. Navigate (Browse...) to
D:\Drivers\01Agp\SETUP.EXE and click OK > Next.
3. To continue, click Next.
4. Click Finish to restart your computer.
...
...
in