monolith EXTRA
3
b) Fitting the left side section
3
c) Attaching the left side section
Aligning left side section
4
approximately
10
All manuals and user guides at all-guides.com
Place element carefully on the stove.
Now slowly slide the side section down-
wards.
If the element is at a slight angle or is
mounted too low, you can adjust it using
the setting screws at the bottom.
English
Ensure that the distances at top
and bottom of the side section
are the same.
Also check that both guide
rails are attached.
Ensure that the side section is
not screwed too far upwards.