Installation Instructions - Vemer RGG-RGM WAVE Manual Del Usuario

All manuals and user guides at all-guides.com
LEGEND
A) Dimensions (page 3)
B) Positioning
C) Assembly
➀
Detector base
➁
Base housing the electronic circuits
➂
Cover
➃
Cable outlet for fixing to the built-in box (type 503 or equivalent)
D) Electrical connections
➄
jumpers
E) Replacement label (page 10)
F) Installation card (page 10)
POSITIONING (fig. B page 4)
• Install in rooms where there is good air circulation (NOT behind doors,
curtains, furniture, etc), away from ventilation openings or ducts, protected
from shock or sources of water.
Avoid particularly damp zones or those with dust build-ups or temperatures
outside the range specified.
Do NOT install over or near gas appliances (minor leakage on switching on
could cause incorrect activation).
Do NOT install over cookers (the steam generated during cooking could
damagethe detector)
NOT to be installed close to water sources, steam and water dip may cause
malfunctions
NOT to be installed close to recipient of paints, thinners, cleaners etc.; such
substances may release gas that can affect to good functioningof detector
(detector is particularly sensitive to ammonia, thinners,solvents, etc)
• Model RGG (fig. B1): position the detector on a smooth wall at a maximum
height of 30 cm from the floor and at a distance from 1 to 4 metres from the
appliances to be controlled.
• Model RGM (fig. B2): position the detector on a smooth wall at a maximum
height of 30 cm from the ceiling) at a distance between 1 and 4 metres
from the appliances to be controlled.

INSTALLATION INSTRUCTIONS

Gas detectors User Manual
- 17 -