Reset; Keys Combination For Manual Control - KPS -IH-DIGI2EASY Manual De Instrucciones

KPS-DIGIEASY

12. Reset

13. Keys combination for MANUAL control

• AUTO/MANUAL
Press " " keys simultaneously, the output state of channel 1 switches to MANUAL.
C1 manual operation
C1
When the output states of other operation modes was changed, Manual mode exits
automatically.
OK Press " " and "OK" keys simultaneously, the output state of channel 2 switches to
MANUAL. When the output states of other operation modes was changed, Manual mode C2 manual operation
C2
exits automatically.
• PERM ON/PERM OFF
Press " " keys simultaneously for 2s, the output state of channel 1 switches to PERM
C1 manual operation
C1
ON/PERM OFF.
> 2s
OK Press " " and "OK" keys simultaneously for 2s, the output state of channel 2
switches to PERM ON/PERM OFF. C2 manual operation
C2
> 2s
Only available for two channel model
AUTO mode
MANUAL mode
PERMANENT ON mode
PERMANENT OFF mode
Press the four keys simultaneously for 0.5 second to reset
automatically. The device was restored to factory settings.
flashes.
flashes.
- 37 -
EN