How It Works; Chaining - GOAL ZERO LIGHTA LIFE 350 Guia Del Usuario

HOW IT WORKS

Your Light-a-Life LED light can power from a Goal
Zero Yeti Portable Power Station or from a Sherpa
Power Bank using a USB to 6mm adapter (SKU:
98101).
1. Insert the green plug into a 6mm 12V port on a
Sherpa Power Pack or Yeti Solar Generator. Ensure
the 12V port on your power source is turned on.
2. Use the power switch on top of the Light-a-Life
to turn it on. Toggle between high and low settings
by moving the switch left or right.
3. Hang with the carabiner or attach to a metal
surface with the magnets.
You can also power the Light-a-Life from a 12V car
port using the included adapter. Simply plug the
Light-a-Life's blue connector into the matching end
of the 12V adapter.
Unexpected rainstorms probably won't harm it.
Ready for Outdoor Use: The Light-a-Life has been
engineered to withstand the elements, including rain
and snow. Although it's tough enough to withstand
a storm, the Light-a-Life should not be submerged
in water and all ports/plugs should be dry before
turning on or chaining.
4

CHAINING

You can chain up to 8 Light-a-
Lifes together.
1. Begin chaining with the first
light in your string that will plug
into your Sherpa Power Pack or
Yeti Solar Generator.
2. Tug slightly on the green
covering over the chaining port
to expose the chaining port.
3. Insert the green plug from
another Light-a-Life into the chaining port.
4. Continue on with the remainder of the lights
in your string.
WARNING: While in use, the
metal neck of the Light-a-Life will
become hot to the touch. It is still
safe to wrap the cable around the
metal neck while in use.
5