THOMSON VS 470 Manual Del Usuario página 8

Transmisor de video sin cables
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
01_VS470_en
24/08/04
10:34
Page 8
All manuals and user guides at all-guides.com
Improvement of picture and sound
You will obtain optimal service operation of your Video Sender by correctly orienting the
antenna (A). However, reflected signals or other signal degrading factors can affect good quality
signal transmission. In this case, readjust antenna positions or slightly move the transmitter or
receiver until you get crystal clear reception.
Transmitter / Receiver
(A)
off.on
If no picture is obtained,
check that the transmitter and the receiver have not been installed in the reverse order (each
unit corresponds either to the input or to the output of the Audio-Video signal). Check that they
have been properly connected and that they are switched on (on position). Ensure that the
channel selector is set to the same letter on both units.
If transmission is blurred or scrambled,
choose another channel but make sure that it is identical on both units.
Transmitter
Receiver
8

Publicidad

Tabla de contenido
loading

Tabla de contenido