All manuals and user guides at all-guides.com
VS660 - 5 langues
17/04/03
Installation of receiver
1. Place the receiver (5) on, or near, the second television set.
2. Connect the receiver (5) to the second television set using the lead (6) following
the same instructions as for the transmitter.
3. Extend the antenna on the receiver (5) and orient it toward the main TV set (TV1).
4. Fit the mains supply lead (7) to the receiver and plug it into a 220/240 V ~ 50 Hz
mains power supply.
! THE ANTENNA allows you to transmit and receive audio and video signals over a
maximum range of 30 meters in free air environments. Inside a typical lodgment the
range will be less because of signal attenuation by building material absorption.
! THE FLEXIBLE ANTENNA permits the control of the unit whose pictures you wish
to see in the room containing the second television set (TV2).
! THE POWER SUPPLY plug fitted to the transmitter (1) is not the same as the one
fitted to the receiver (7).
TV2
11:38
Page 6
Rec eive
r
LEFT
RIGHT
IR OUT
VIDEO IN
AUDIO IN
DC 12V
6
YELLOW
6
220/240V ~ 50 Hz
VS 660 U
VS 660
VS 660 SP
5
7
AUDIO OUT
VIDEO OUT
DC 12V
L
R
WHITE
RED