How To Use Revit; Revit™ Setup; Treating With Revit™ For The First Time - Home Skinovations Silk'n ReVit Instrucciones De Uso

Revit™ should never be left unattended when plugged into an outlet.
Do not operate Revit™ if it has a damaged cord or plug and keep the power cord away from heated surfaces.
Do not use Revit™ if you see or smell smoke when it is in use.
Do not use Revit™ if any or all vents in its GRIP are blocked.
Do not use Revit™ if any of its part are cracked, broken, or coming apart
Unplug Revit™ before cleaning.
Do not use Revit™ with any attachments or accessories not recommended by Home Skinovations Ltd.
Revit™ must be operated only with its designated adaptor
Do not insert foreign objects into the Revit™ device!

8. How To Use Revit™

8.1 Revit™ Setup
Remove the Revit™ exfoliation device, and other components from box.
Choose the Filing Tip you require: Coarse - for heavy duty exfoliating, Medium – for a gentler treatment, or
Fine for delicate finishing. For further instructions on how to replace the TIP please refer to section 11.2
Note: it is highly reccomended to start treatment with the Fine grained tip!
Plug the power cord into the Revit™ Device socket.
Plug the other end of the power cord into an electrical outlet.
Your Revit™ is now ready to start.
8.2 Treating with Revit™ for the first time
The skin should be clean, dry and free of any powders, antiperspirants or deodorants.
1. Give the ON BUTTON one short press. The device is now on Partial Suction Mode and is ready for use.
2. Hold the device firmly from its GRIP area, making sure your hand does not block the AIR VENTS.
3. If you wish to increase the suction intensity level, press once on the ON BUTTON to increase the level from
Partial to Full Suction Mode.
4. Apply the FILING TIP to the skin, making sure the skin is spread evenly and smoothly and the TIP is in full
contact with the skin.
6
All manuals and user guides at all-guides.com