Viewing the menus
. With the power on, press the mEnu button.
The main menu appears on the screen. The menu' s left side has five icons:
Picture, Sound, Channel, Setup, Input.
. Use the ▲ or ▼ buttons to select one of the five icons.
Then press the EntEr button to access the icon's sub-menu.
. Press the ExIt button to exit.
The on-screen menus disappear from the screen after about one minute.
memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available
channels are memorized, use the Ch
channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source, memoriz-
ing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to
the TV (i.e. an Air or a Cable system).
. Press the mEnu button to display the menu.
Press the ▲ or ▼ buttons to select "Channel", then press the
EntEr button.
. Press the EntEr button select "Antenna".
Press the ▲ or ▼ buttons to select "Air" or "Cable", then press the EntEr button.
Press the ExIt button to exit.
BN68-01184A-Eng.indd 15
All manuals and user guides at all-guides.com
or Ch
buttons to scan through the channels. This eliminates the need to change
English -
tV
picture
mode
: dynamic
►
Contrast
00
Brightness
Sharpness
Color
tint
G 0
r 0
Color tone
: Cool
►
▼More
move
Enter
return
tV
Channel
antenna
: air
►
auto program
►
Clear Scrambled Channel
►
Channel list
►
name
►
fine tune
►
Signal Strength
►
lna
: on
►
move
Enter
return
tV
Channel
antenna
:
air
air
Cable
auto program
Clear Scrambled Channel
Channel list
name
fine tune
Signal Strength
lna
: on
move
Enter
return
2007-02-13
1:33:40