Protecting The Environment - DeWalt DCF620 Manual De Instrucciones

approved eye protection and approved dust mask when performing this
procedure.
WARNING: Never use solvents or other harsh chemicals for cleaning
the non-metallic parts of the tool. These chemicals may weaken the
materials used in these parts. Use a cloth dampened only with water and
mild soap. Never let any liquid get inside the tool; never immerse any part
of the tool into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect the charger from the AC outlet
before cleaning. Dirt and grease may be removed from the exterior of
the charger using a cloth or s oft non-metallic brush. Do not use water
or any cleaning solutions.
NOSECONE MAINTENANCE (FIG. 1, 5)
If the nose cone (D) becomes hard to turn it may be contaminated with
drywall dust.
1. Remove nose cone from tool.
2. Rinse thoroughly with warm water while rotating both screw depth
adjustment collar (B) and locking collar (C). Never use oil or solvents.
3. Dry the nosecone completely before reattaching to tool.
Accessories
WARNING: Since accessories, other than those offered by D
have not been tested with this product, use of such accessories with
this tool could be hazardous. To reduce the risk of injury, only D
recommended accessories should be used with this product.
Recommended accessories for use with your tool are available at extra
cost from your local dealer or authorized service center.
Repairs
The charger and battery pack are not serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
personnel, always using identical replacement parts.
All manuals and user guides at all-guides.com

Protecting the Environment

Should you find one day that your D
or if it is of no further use to you, do not dispose of it with household
waste.
Local regulations may provide for separate collection of electrical
products from the household, at municipal waste sites or by the retailer
when you purchase a new product.
D
e
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorized
service center that will collect them on our behalf.
You can check the location of your nearest authorized service center by
contacting your local D
is included in the packaging of this product.
WALT,
e
WALT,
e
* Maximum initial battery voltage (measured without a workload) is
20 volts. Nominal voltage is 18V.
40
Separate collection. This product must not be disposed of with
normal household waste.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces the
demand for raw materials.
WALT provides a facility for the collection and recycling of D
WALT office. Alternatively, a service center listing
e
SPECIFICATIONS
DCF620 20V Máx*
WALT product needs replacement,
e
WALT
e
0–4 400 RPM