How To Use - EarFun EFC100 Manual Del Usuario

How to Use

Make sure your device supports the wireless charging and is Qi compatible
Choosing the Best Adapter (not included and is sold separately)
Make sure you adapter supports the Quick Charge 2.0/3.0 with output up to DC12V.
The details of charging power and adapter output requirements are as below:
Charging Power
15W
10W
7.5W
5W
Note:
1. If choose an adapter with the output lower than 5V/2A, it may cause slow charging
or even unable to charge.
2. The actual charging power depends on the wireless charging power supported by the
smart phone you are using, the smart phone will automatically choose the power itself.
Connect and place the device to the center of the wireless charging pad
2
Adapter Output Requirements
DC12V, ≧1.67A
DC9V, ≧2A
DC9V, ≧1.5A
DC5V, ≧2A
Note:
If the device is not placed in the center of
the wireless charging pad, it will cause slow
charging or unable to charge.