Telstar TAPU200210MD Manual De Instrucciones página 17

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE
READ AND SAVE THESE INSTRUCTIONS
WARNING: RISK OF ELECTRIC SHOCKThese servicing instructions are for use by qualified personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so!
Filter cleaning/replacement
Cleaning
When the UV light on the display panel flashes,
it prompts you to replace the filter
Please select a filter that matches the model of the
machine for replacement. Please purchase from your
local authorized dealer.
For more details on the installation of the filter, please
see the "installation" section.
Press the UV button for 3 seconds, the filter resets and
restarts the timer
- It is recommended to clean the filter twice a week and replace the filter half a year (adjust the cleaning and
replacement cycle according to the use environ-ment);
- Can not wash the filter;
- Smaller soft brushes or household vacuum cleaners are recommended for filter cleaning.
- When using the brush to clean, it should be brushed horizontally along the filter to avoid vertical brush, so as
not to damage the filter;
- When cleaning with a vacuum cleaner, keep the suction outlet 5-1Omm away from the surface of the filter
so as not to damage the filter.
- When used under the strong odor produced by cigarettes, barbecues, etc., the filter may have an odor in a
matter of weeks or months. Please clean and dry filter (2-5 days). If you still cannot eliminate the odor, replace
the filter.
17
AIR PURIFIER
TAPU200210MD

Publicidad

Tabla de contenido
loading

Tabla de contenido