Rapid EN330 Manual Del Usuario página 10

TECHNICAL SPECIFICATION
Model Number
Voltage
Current
Brad type, length
Magazine Capacity
Speed, maximum continuous
Tool Weight
NOISE EMISSION
A-weighted sound pressure level LpA=85.4 dB(A), uncertainty K=3
dB(A)
A-weighted sound power level LwA=96.4 dB(A), uncertainty K=3
dB(A)
Recommendation for the operator to wear hearing protection.
VIBRATION
Vibration total value=4.626 m/s2 , uncertainty K=1.5 m/s2
The declared vibration total value has been measured in accordance
with a standard test method and may be used for comparing one tool
with another.
The declared vibration total value may also be used in a preliminary
assessment of exposure.
WARNING
The vibration emission during actual use of the power tool can
differ from the declared total value depending on the ways in
which the tool is used.
It's needed to identify safety measures to protect the operator that are
based on an estimation of exposure in the actual conditions of use
(taking account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle in addition to
the trigger time).
DEFINITIONS (FIGURE 1)
: Trigger
: Power Cord
: On/Off Power Switch
: Power Adjuster
: Magazine Latch
: Indicator Window
: Brad Output
: Safety Yoke
LOAD BRADS INTO THE MAGAZINE
1. Turn off the power switch and unplug the nailer (Figure 2).
2. Squeeze latch and slide magazine open (Figure 3).
ASSEMBLY
10
EN330
220-240 V~, 50Hz
9.6 A
Rapid T8, 15-30 mm
110 brads (145 mm)
20 shots/min
1.325 kg