EN
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user manual
or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
Not intended for use by children.
SAFETY WARNINGS
Please read these instructions carefully and
thoroughly before using this product and keep
them for future reference. It is important that you
understand how to use this product correctly, so
please take the time to familiarize yourself with the
requirements as outlined in these instructions.
• If you are in any doubt about using this product,
it is strongly recommended to employ the servi-
ces of a suitably qualified expert.
• Please consult the manual for your TV and en-
sure that the weight and size of the TV is within
the limits specified for this product
• Note that not all of the supplied mounting
accessories provided may be required for the
installation of your specific TV.
• The mounting accessories provided are ex-
clusively intended for installation onto strong
supporting structures such as solid brick, solid
concrete or solid wood columns.
6
2. PRODUCT INFORMATION
Model no.
Dimensions
Wall clearance
Weight
Max. supported screen weight
Supported screen diagonal
Supported VESA patterns
DESCRIPTION
1. Wall mount
2. TV support arm
3. Allen key
4. Wall plate cover piece (top/bottom)
5. Wall plate cover piece (center)
6. Spirit level
7. Hardware kit
3. INSTALLATION
Before installation
Ensure that your TV is compatible with this
wall mount before proceeding the
installation.
Ensure that the supporting wall is capable
of sustaining the combined weight of this
wall mount and the TV.
Attach Wall Plate to Wall
Choose option A or B depending on your wall
construction.
Option A: Installing in drywall with timber supports
(Figure D)
1. Locate the center a timber stud using a stud
finder.
You must use the center of the stud to avoid
cracking or splitting the timber during
installation.
TM503XX
480 x 430mm
60 - 473mm
3,5kg
50kg
32" - 75"
400 x 400
400 x 200
300 x 300
200 x 200
100 x 200
WWW.VONROC.COM