VONROC TM503XX Traducción Del Manual Original página 8

EN
Tilt adjustment (Figure J)
1. Extend the wall mount fully outwards to provide
easier access to the tilting mechanism.
2. Slightly loosen the bolts (9) of the tilting mecha-
nism by using the provided allen key (3), so you
may adjust the tilt angle of the TV to the desired
angle.
3. Once the TV is in the correct position, secure it
in place by re-tightening the bolts.
Level adjustment (Figure K)
In some instances a slight adjustment might be
required to level the TV.
1. Extend the wall mount fully outwards to provide
easier access to the mechanism.
2. Ask a second person to support the TV and ca-
refully loosen the tension on the four bolts (10)
behind the mounting plate.
Once the tension on each bolt is slightly
loosened the TV may be leveled. Completely
removing the bolts (10) from the mounting
plate is not suggested as this is not
required to perform the level adjustment.
3. Adjust the TV to the correct position and secure
it in place be re-tightening the bolts (10).
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or
improperly maintained;
• Non-original spare parts have been used.
8
This constitutes the sole warranty made by compa-
ny either expressed or implied. There are no other
warranties expressed or implied which extend
beyond the face hereof, herein, including the
implied warranties of merchantability and fitness
for a particular purpose. In no event shall VONROC
be liable for any incidental or consequential dam-
ages. The dealers remedies shall be limited to
repair or replacement of nonconforming units or
parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
WWW.VONROC.COM