Publicidad
All manuals and user guides at all-guides.com
English
Plaster in the installed Trio, in case of pre-wall installation cover
the Trio with a panel.
After the plastered wall surface is dry seal the gap with silicone
(free from acetic acid!) between wall and plastic housing of the
ibox.
Apply PCI-Lastogum or similar sealing compound on the wall in
accordance with manufacturers indications.
Put gasket over the plastic housing of the ibox.
Important! The gasket is not suitable for hot glue.
If the Trio Stop should be hot glued, please take care that it is not
damaged.
3
Publicidad
