English; Original Instructions; Technical Specifications; List Of Features - IKEA FIXA Manual Del Usuario

ENGLISH

FIXA Cordless screwdriver

TECHNICAL SPECIFICATIONS

Charger input voltage: Local input voltage
Charger output voltage: 5Vd.c.
Battery voltage/battery type:
3.6 V lithium-ion battery
Charging time: 5-8 hours
Max. torque: 3 Nm
Max no load speed: 200 rpm
Bit holder: 6.35 mm (1/4")
Vibration (according to EN 60745-1,
EN 60745-2-1, EN 60745-2-2):
Screwdriving without impact:
ah=0.307 m/s², K=1.5 m/s².
Noise (according to EN 60745-1):
Noise pressure level Lpa = 62.97 dB (A),
Kpa = 3 dB (A)
Noise power level Lwa = 73.97 dB (A),
Kwa = 3 dB (A)

LIST OF FEATURES

The numbering of the product features
shown refers to the illustration no. 1 on the
graphic page.
1. Screwdriver main body.
2. Screwdriver bit holder.
3. Forward/reverse switch.
4. Charging socket.
5. Charger.
Intended use
The electric screwdriver is suitable for the
insertion and removal of screws.

GENERAL SAFETY INSTRUCTIONS

General safety instructions
for power tools
WARNING!
All manuals and user guides at all-guides.com
all instructions. Failure to follow all the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in all of the warnings
listed below refers to your mains operated
(corded) power tool or battery operated
(cordless) power tool.
Work area safety
a. Keep work area clean and well lit.
b. Do not operate power tools in
c. Keep children and bystanders
Electrical safety
a. Power tool plugs must match the
b. Avoid body contact with earthed or
c. Do not expose power tools to rain or
Read all safety warnings and
Cluttered and dark areas invite accidents.
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust of
fumes.
away while operating a power tool.
Distractions can cause you to lose
control.
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
4