IKEA FIXA Manual Del Usuario página 7

d. Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
the cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk of
electric shock.
e. When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk
of electric shock.
f. If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
a. Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b. Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
c. Prevent unintentional starting:
Ensure that the switch is in the off-
position before connecting to power
source and/or battery pack, picking
up or carrying the tool. Carrying power
tools with your finger on the switch or
plugging in power tools that have the
switch on invites accidents.
d. Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may result
in personal injury.
All manuals and user guides at all-guides.com
e. Do not overreach. Keep proper
f. Dress properly. Do not wear loose
g. If devices are provided for the
Power tool use and care
a. Do not force the power tool. Use
b. Do not use the power tool if the
c. Disconnect the plug from the power
d. Store idle power tools out of the
e. Maintain power tools. Check for
footing and balance at all times. This
enables better control of the power tool
in unexpected situations.
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewellery
or long hair can be caught in moving
parts.
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
these devices can reduce dust related
hazards.
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
source and/or the battery pack
before making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
5