Amplicom CL100 Guia Del Usuario página 10

Clock functions
Caution: Exposure to the alarm at full volume for a long period could cause
ear damage.
Selecting the acoustic signal
Turn the acoustic signal rotary knob to required acoustic signal.
Setting the pitch
Turn the pitch rotary knob to set the pitch. It may be possible to
detect higher or lower pitch tones even at low volumes.
Setting the clock face illumination
Slide the illumination switch to set clock face illumination. The
following settings are available: (From left to right) bright,
medium or off.
Selecting the alarm mode
Slide the alarm mode switch to set the type of alarm. There are
MODE
three settings available: (from left to right) vibration only, acoustic
signal only or acoustic signal and vibration.
10
All manuals and user guides at all-guides.com
Service Center