Publicidad
All manuals and user guides at all-guides.com
2.10 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA2 Connectors
(SATA2_2_3: see p.2, No. 13)
SATA2_3
(SATA2_4_5: see p.2, No. 14)
SATA2_5
Serial ATA3 Connectors
(SATA3_0_1: see p.2, No. 12)
SATA3_1
Serial ATA (SATA)
Data Cable
(Optional)
USB 2.0 Headers
(9-pin USB4_5)
(see p.2, No. 22)
(9-pin USB6_7)
(see p.2, No. 21)
ASRock Z77 Extreme3 Motherboard
These four Serial ATA2 (SATA2)
connectors support SATA data
SATA2_2
cables for internal storage
devices. The current SATA2
interface allows up to 3.0 Gb/s
SATA2_4
data transfer rate.
These two Serial ATA3 (SATA3)
connectors support SATA data
SATA3_0
cables for internal storage
devices. The current SATA3
interface allows up to 6.0 Gb/s
data transfer rate.
Either end of the SATA data
cable can be connected to the
SATA / SATA2 / SATA3 hard
disk or the SATA2 / SATA3
connector on this motherboard.
Besides four default USB 2.0
ports on the I/O panel, there are
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB 2.0
ports.
33
Publicidad
Capítulos
