Use Of Memory Card; Startup/Shutdown; Startup; Shutdown - Phoenix XPLORERcam Manual De Usuario

4.2 Use of Memory Card.

1. Push the TF card into the card slot according to the concave lettering beside the slot of memory card till it is
completely inserted.
2. To take out the TF card, gently press the end of the memory card inward and it will pop up.
Note: No built-in memorizer is available in this video camera.
Make sure to insert memory card before using.

4.3 Startup/Shutdown

4.3.1 Startup.

Press the POWER Key for 3 seconds, the screen is displayed and the camera enters the startup state.

4.3.2 Shutdown.

Press the POWER Key once under idle condition, and the camera will be shut down. .
Automatic shutdown: when the idle time of the video camera reaches the time for automatic shutdown, it
will be shut down automatically to save power. The default time of this camera for automatic shutdown is 5
minutes.
27