Fimar EasyLine SM-CJ4 Manual De Uso Y Mantenimiento página 6

When using electrical appliances, basic precautions should always be followed, including the following:
1. Read all instructions, and save it for future reference.
2. Before use, check that the voltage of wall outlet corresponds to the one shown on the rating plate.
3. Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning. Clean motor
housing with wet cloth, and wipe dry. Don't dip in water for rinse.
4. The instrument is not intended to be used by persons disabled, with mental aberration or without related
experiences and knowledge (including children), except they are supervised and directed by persons who are
responsible for their safety to use the product.
5. Colse supervision is necessary for any appliance being used by or near children.
6. Do not operate any appliance with a damaged supply cord or plug or after the appliance malfunctions, or is dropped
or damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or
electrical or mechanical adjustment.
7. Don't let supply cord hang over edge of table or worktop, or touch hot surface.
8. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified
person in order to avoid hazard.
9. Don't use the appliance if the rotating cone is damaged.
10. Switch off the appliance before changing accessories or approaching parts which move in use.
11. Keep hands, hair, clothing, as well as scraper and other utensils away from juicer during operation to reduce the
risk of injury to persons, and damage to the juicer.
12.Wash all parts and components contact with juice. Flush them with water and cool for dry.
Technical information
MODELLO
POWERINPUT
RATED VOLTAGE
FREQUENCY
SPEED
DIMENSIONS
Operation Instruction
1. Place a recipient with suitable capacity under the product ejection opening.
2. Press the button to start the appliance.
3. Cut product to be squeezed in half and place it on the juice cone .
4. Lightly press the product down to start juicing (for model SM-CJ4 SM-CJ5 only).
5. Lower the presser to start juicing the product (for model SM-CJ5A SM-CJ6 only).
6. Press the button to stop the appliance when finished.
If it is the first time the appliance is used, remove any protective linings and accurately clean to remove
any construction material residue before starting it.
SM-CJ4 SM-CJ5
180W
230V
50-60Hz 50-60Hz
1800rpm 1800rpm
310*220*360 340*340*420
SM-CJ5A
180W 230W
230V 230V
50-60Hz
1450rpm
340*210*480
2
SM-CJ6
230W
230V
50-60Hz
980rpm
360*280*470