Maintenance; Maintenance Schedule - Husqvarna LC 247 Manual De Usuario

• Keep the cutting cover clean. Buildup from grass and
dirt on the inner side of the cutting cover can
decrease the cutting result. Refer to
inner surface of the cutting cover on page 13 .
Introduction
WARNING:
maintenance, you must read and
understand the safety chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.

Maintenance schedule

CAUTION:
is up and not against the ground when you
tilt the product. Risk of engine damage.
12
To clean the

Maintenance

Before you do
Make sure that the air filter
CAUTION:
start, remove the battery before you do
maintenance, repairs or clean the product.
The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
For maintenance identified with * see instructions in
Maintenance on page 12 .
For models with electrical
808 - 006 - 22.10.2021