IMPEX MARCY PRO PM-5108 Manual Del Usuario página 9

STEP 2 (See Diagram 2)
A.) Do not tighten the Nuts and Bolts until instructed to do so.
B.) Attach the Lower Pulley Frame (#11) to the Cross Brace (#5). Secure it with two M10 x 2
½" Carriage Bolts (#45), one 4 3/8" x 1 ¾" Bracket (#19), two Ø ¾" Washers (#55), and
two M10 Aircraft Nuts (#57).
C.) Slide the Sliding Weight Post (#14) onto the Weight Glide Post (#12). Make sure the
triangular shape bracket on the Sliding Weight Post needs to face upward.
D.) Attach the 3 1/8" x 1 ¾" Bracket (#20) to lower Weight Glide Post, and attach Weight Glide
Post to the Lower Pulley Frame. Secure the upper hole with one 10 x 2 ½" Carriage Bolt
(#45), one Ø ¾" Washer (#55), and one M10 Aircraft Nut (#57). Secure the lower hole with
one M10 x 2 3/8" Allen Bolt (#50),and one Ø ¾" Washers (#55).
E.) Attach the Upper Frame (#13) to the Chin-up Bar (#6). Secure them together with two M10
x ¾" Carriage Boles (#47), two Ø ¾" Washers (#55), and two M10 Aircraft Nuts (#57).
F.) Attach the 3 1/8" x 1 ¾" Bracket to upper Weight Glide Post, Secure the upper hole with
one M10 x 2 3/8" Allen Bolt (#50) and one Ø ¾" Washer (#55). Secure the lower hole with
one M10 x 2 ½" carriage Bolt (#45), one Ø ¾" Washer (#55), and one M10 Aircraft Nut
(#57).
G.) Securely tighten all Nuts and Bolts in Step-1 and Step-2.
©IMPEX INC.
8
www.marcypro.com