Sanus Systems SFV49 Instrucciones De Montaje página 5

Step 2: Attach Brace Bars to Front Frame
Thread a Short Allen Bolt (g) through each hole in the Upper Brace Bar (e) until the bar is secured to the Front Frame (a). See Detailed
View A of Diagram 2 for assistance. Proceed to thread a Short Allen Bolt through each hole in the Lower Brace Bars (f) so each bar is
secured to the Front Frame. See Detailed View B of Diagram 2 for assistance. Do not fully tighten the Short Allen Bolts at this time.
Diagram 2
Step 3: Attach Back Frame
Thread a Long Allen Bolt (h) through a Washer (i), the Back Frame (b), and into the back of the Brace Bar (e,f) as seen in Diagram 3. Repeat
process for each of the four remaining Long Allen Bolts. Make sure the stand is square and level. Once everything is positioned correctly,
proceed to tighten all of the Long Allen Bolts as well as the Short Allen Bolts (g) from Step 2 with the Allen Key (l) until they are tight.
Detailed View B
a
e
Diagram 3
f
Detailed View A
a
f g
e g
b
i h