Publicidad
Idiomas disponibles
Idiomas disponibles
English
Feeder cup
Jar cover
Handle
Jar
Blade unit
Blender body
High/Low switch
Speed setting
INSTRUCTIONS
This device is suitable for fine pureeing and blending
only. Any other use may result in damage to the device or
injuries.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1.
Read this manual before first use thoroughly. It
contains important information for your safety as well
as for the use and maintenance of the equipment. Keep
these instructions for future reference and pass it on
with the device.
2. Pay particular attention to the warnings on the device
and in this instruction manual.
3. Use the device only for its intended purpose. Improper
use may lead to hazards.
4. This device is designed for household use only, not for
staff kitchen areas in shops, offices and other working
environments, farm houses, by clients in hotels, motels
and other residential type environments, bed and
breakfast type environments use. It is not suitable for
commercial use.
5. In the event of improper use or wrong operation, we do
not accept any liability for resulting damages.
6. The use of accessories and components not expressly
recommended by the manufacturer may result in
injuries or damages and voids the warranty.
7.
This device is not intended to be used by persons
(including children) with reduced physical, sensory
or mental abilities or lack of experience and / or
lack of knowledge unless they are supervised by a
person responsible for their safety or have received
instructions on how to use the device.
8. Children should be supervised to ensure that they do
not play with the device.
9. Never leave the device unsupervised while it is
switched on.
10. Do not place heavy objects on top of the device.
11. Never immerse electrical parts of the device in water
during cleaning or operation. Never hold the device
under running water.
Power supply
1.
The mains voltage must match the information on the
rating label of the device.
2. The power plug is used as the disconnect device.
Please be sure that the power plug is in operable
condition.
3. Only removing the power plug can separate the device
completely from the mains supply.
4. Avoid damages to the power cord that may be caused
by kinks or contact with sharp corners.
5. Make sure, the device, including power cord and power
plug are not exposed to hot surfaces.
6. Only unplug from the power outlet by the plug itself.
Do not pull on the cord.
7.
Disconnect the power plug when the device is not
in use, in case of malfunctions, prior to attaching
accessories and prior to each cleaning.
WKBE1008B_BA_Table Blender_EnSp_IM.indd 2
1
8. If the power cord or the casing of the device is
damaged or if the device is dropped, the device may
not be used before it is examined by a professional
electrician.
9. A damaged power cord may only be replaced by the
manufacturer or a workshop commissioned by the
manufacturer or by a similarly qualified person in order
to avoid hazards.
Installation location
1.
Place the device on a flat, sturdy and heat-resistant
surface.
2. Put the device in a place which is out of reach of
children.
3. Do not operate this device near flammable materials
(e.g. curtains, textiles, walls) and never cover it. Ensure
that there is always a sufficient safe distance from
flammable materials.
4. Use this device in dry indoor areas only and never
outdoors.
5. WARNING: Do not use this device near water or
heavy moisture; e.g. in a damp basement or beside a
swimming pool or bathtub.
6. In order to reduce the risk of fire and electric shock, do
not expose the device to fire (fireplace, grill, candles,
cigarettes and so on) or water (water drops, water
splashes, vases, tubs, ponds and so on).
7.
Keep this device away from all heat sources like for
example, ovens, hot plates and other heat-producing
devices/objects.
8. Protect this device from extreme heat (over 35 °C) and
cold (under 5 °C) as well as from direct sunlight and
dust.
SPECIFIC SAFETY INSTRUCTIONS
1.
Remove accessories from the device once the motor
has come to a complete stop and the plug has been
pulled.
2. Make sure that the motor unit and power cable do not
become wet.
3. Do not operate the device when it is empty in order to
prevent damages.
4. CAUTION: Do not touch any moving parts while the
device is still in operation.
5. CAUTION: Be careful when handling the blade unit. It
has sharp edges.
6. Clean the device and other accessories after each use.
Refer to the Chapter CARE AND MAINTENANCE.
7.
Keep hands and utensils out of container while
blending to reduce the risk of severe personal injury
and/or damage to blender.
8. Do not use a broken, chipped or cracked blender jar.
9. Always operate blender with cover in place.
10. Always begin processing at the lowest speed setting.
11. It is suggested that this appliance should not work
continuously for 3 minutes. If needed, wait until the
housing's temperature is no higher than your hand's.
BEFORE USING FOR THE FIRST TIME
1.
1. Carefully take the device and its accessories out
of the packaging. Retain the packaging in case you
would like to store the device away or transport it at a
later date. If you choose to dispose of the packaging,
then please do so according to the applicable legal
regulations.
2. Check the packaging contents for completeness and
damages. Should the contents in the packaging not
be complete or be damaged, do not use the device.
Return it to your retail outlet immediately.
3. Clean the device and all accessories before the first
use. Refer to the chapter CARE AND MAINTENANCE.
USING THE BLENDER
Control panel
•
Off: Switch machine off
•
Low: Press to set speed level from 1 to 5.
•
High: Press to set speed level from 6 to 10.
2
•
Speed buttons: To set speed levels from 1 to 10.
•
Pulse: Use for thick mixtures.
Operation
1.
Put the blender jar on the body and put on the jar
cover.
2. Make sure the switch is off and check if the voltage
indicated on the appliance corresponds to the local
mains voltage before you connect the appliance.
3. When blending, cut the materials into cube blocks of
about 15 mm and put them into the jar, add proper
amount of water and cover the jar. Note that the water
amount should not exceed the maximum capacity
of the jar. Press the Pulse button several times for
pre-blending and turn to other buttons according to
respective needs.
4. Choose the speed according to the amount and nature
of the ingredients being blended.
•
To use PULSE, Push PULSE and hold down for not
more than 5 seconds at a time. Release PULSE and
allow blade to stop. Repeat cycle as desired.
5. If you want to see the blending effect or add fruits or
vegetables, just open the transparent feeding cup.
6. When finish, switch off and pull out the power plug.
Take out the blender jar vertically and pour the juice
into the container.
7.
When using, do not open the jar cover to add water
or other liquid. It is better to fill in ingredients of 2/3
amount of the jar's capacity.
CARE AND MAINTENANCE
CAUTION: Never immerse the blender body in water or
any other liquid.
NOTE: Never use solvents and abrasives, hard brushes,
metallic or sharp objects for cleaning. Solvents are harmful
to health and attack the plastic parts. Abrasive cleaners
and tools scratch the surface.
1.
Put into the jar proper amount of warm water and a
little food detergent, cover the jar and press the pulse
button for about 10 seconds; or wash all removable
parts in warm soapy water; rinse and dry thoroughly.
2. Wipe the main body with a piece of wet cloth. Do not
wash it in water to prevent damage.
3. Store the appliance in its original box in a cool and dry
place.
DISPOSAL
Proper disposal of this product.
This label indicates that, in the EU, electronic devices
cannot be disposed of with regular household waste.
Please use the return or collections systems of your
municipality or contact the seller where you purchased this
product.
INFORMATION AND SERVICE
If you have question or concerns about your product,
please visit our website:
www.westinghouse-starglory.com, or contact our oversea
offices/agents.
In line with our policy of continuous product development,
we reserve the right to change product, packaging and
documentation specifications without notice.
3
Español
Jarra
Blade unit
Interruptor Alta/Baja
Ajuste de velocidad
INSTRUCCIONES
Este dispositivo solo es adecuado para hacer purés y
mezclar. Cualquier otro uso puede resultar en daños en el
aparato o lesiones.
MEDIDAS IMPORTANTES DE SEGURIDAD
Siga las precauciones de seguridad básicas, entre ellas:
1.
Lea atentamente este manual antes de usarlo por
primera vez. Contiene información importante para
su seguridad, así como para el uso y mantenimiento
del equipo. Guarde estas instrucciones para futura
referencia y transmítalas con el dispositivo.
2.
Preste especial atención a las advertencias presentes en
el dispositivo y en este manual de instrucciones.
3.
Utilice el dispositivo sólo para los fines previstos. El uso
inadecuado puede dar lugar a riesgos.
4. Este dispositivo está diseñado solamente para uso
doméstico, no para el área de cocina del personal de
tiendas, oficinas y otros ambientes de trabajo, casas
rurales, por parte de los clientes de hoteles, moteles y
otros entornos de tipo residencial o de alojamiento. No
es adecuado para uso comercial.
5.
En caso de uso incorrecto o mal funcionamiento, no
aceptamos ninguna responsabilidad por los daños
resultantes.
6. El uso de accesorios y componentes que no estén
expresamente recomendados por el fabricante puede
ocasionar lesiones o daños y anula la garantía.
7.
Este dispositivo no está diseñado para ser utilizado
por personas (incluidos niños) con discapacidades
físicas, sensoriales o mentales o falta de experiencia y/o
conocimiento, a menos que estén supervisados por una
persona responsable de su seguridad o hayan recibido
instrucciones sobre cómo utilizar el dispositivo.
8.
Es necesario supervisar a los niños para asegurarse de
que no jueguen con el dispositivo.
9.
No deje el aparato sin vigilancia mientras está
encendido.
10. No coloque objetos pesados sobre el aparato.
11. No sumerja las piezas eléctricas del dispositivo en
agua durante la limpieza o funcionamiento. No sujete el
dispositivo bajo agua corriente.
Fuente de alimentación
1.
La tensión de red debe coincidir con la información en la
etiqueta del aparato.
2.
El enchufe de alimentación se utiliza como dispositivo
de desconexión. Asegúrese de que el enchufe esté en
buenas condiciones de funcionamiento.
3.
El aparato sólo debe desconectarse de la red eléctrica
extrayendo el enchufe.
4. Evite daños al cable de alimentación que pueden ser
causados por torceduras o el contacto con bordes
afilados.
5.
Asegúrese de que el dispositivo, incluyendo el cable de
alimentación y el enchufe, no se exponga a superficies
calientes.
6. Utilice sólo el enchufe para desenchufar el aparato de la
toma de corriente. No tire del cable.
7.
Desconecte el enchufe cuando el dispositivo no esté
4
Alimentador
Tapa de la jarra
Mango
Cuerpo de la
licuadora
3/9/2017 4:04:52 PM
Publicidad
