Cleaning And Maintenance - ARDES Medicura m223 Folleto De Instrucción

All manuals and user guides at all-guides.com
INSTRUCTIONS FOR USE
Place the appliance on a stable surface, make sure that the water tank and medicine cup
have been filled correctly.
Close the cover well and connect the appropriate accessory.
To connect the plug into the power supply, put the power switch on position "I" and press
the ON button of the appliance: the operation LED will light up.
When started, the appliance automatically sets to the minimum air flow. Thus the air flow
indicator light will indicate the lowest level.
The appliance has three flow rate settings: minimum, medium, maximum. Actually, the
nebulization level can be adjusted, according to your doctor's instructions, by pressing the
appropriate button. The indicator lights will indicate the level in use.
When the flow becomes intermittent, stop the therapeutic session for a few seconds; wait
for the droplets of solution left on the walls of the nebulization chamber to fall into the
medicine cup, finish the therapy and shut of the apparatus.
When the therapy is finished, a small amount of residual solution will remain in the medicine
cup.
When the application is finished, turn off the appliance and follow the cleaning instructions
provided in this handbook.

CLEANING AND MAINTENANCE

The appliance requires no particular maintenance, it should simply be cleaned regularly.
Check all the accessories before each use, and replace them if they are dirty, worn or
damaged.
Remove the plug before carrying out any cleaning operations.
When the application is finished, perform the following operations: remove the cover and
the medicine cup, eliminating any residual medicine.
Empty the water tank and clean it together with the transducer using a soft down-free
cloth.
To clean the accessories and the cover use denatured alcohol or a hypochlorite-based
solution which is commonly available in pharmacies.
The outside of the appliance and the storage space should be cleaned when necessary
with a soft cloth soaked in alcohol. Before using the appliance, make sure the alcohol has
completely evaporated.
Do not use other substances, liquids or excessively damp cloths, as any seepage
into the appliance could cause irreversible damage.
NEVER IMMERSE THE APPLIANCE IN WATER.