SAFETY INSTRUCTIONS
Definitions
DANGER: Indicates a hazardous situation that, if not
avoided, will result in death or serious injury.
WARNING: Indicates a hazardous situation that, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a hazardous situation that, if
not avoided, could result in minor or moderate injury.
NOTICE: Indicates information considered
important, but not hazard-related (e.g. messages
relating to property damage).
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: READ AND FOLLOW INSTRUCTIONS, SAVE
THIS MANUAL FOR FUTURE USE.
WARNING: RISK OF PERSONAL INJURY AND/OR
PROPERTY DAMAGE DUE TO IMPROPER ELECTRICAL
CONNECTION.
• Connect unit to designated electrical supply.
• Connect to a properly grounded outlet only.
• Do not move or position the fogger by pulling it by
the electrical cord.
• Always use a grounded (3 terminal) extension cord
to avoid electrical shock.
• Do not use, if power cord is worn or damaged.
• To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
• Do not contact moving parts
• Do not expose to rain or store outside.
• Use with water-soluble liquid solutions only.
• Never use fogger if the motor is seized or making
noise, or if fogger is leaking.
• Do not unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
• Disconnect power prior to emptying the fogger fluid
or changing inlet filter plate.
DANGER: RISK OF DEATH, SEVERE PERSONAL INJURY,
AND/OR PROPERTY DAMAGE FROM IMPROPER
CHEMICAL USE OR MIXTURE.
• Never use flammable or combustible chemicals
in this fogger. Fogging flammable or combustible
chemicals can create combustible fumes that could
be ignited, causing an explosion.
• Use only chemicals indicated for fogging
applications. Some chemicals may create a toxic or
other hazardous atmosphere when fogged.
• Always refer to chemical manufacturer' s instructions
and/or the chemical Safety Data Sheet (SDS) for
proper mixture and safe application. Mix and
2
handle all chemicals according to label directions.
Ensure that chemical mixture is recommended for
ultra-low volume (ULV) fogging application.
• Do not use chemicals that are not recommended
for ULV application according to the manufacturer' s
label.
OPERATING INSTRUCTIONS
WARNING: RISK OF PERSONAL INJURY DUE TO
CHEMICAL EXPOSURE.
• Read and understand the entire instruction manual
before using this fogger.
• Follow all instructions and precautions in the
instruction manual when using this fogger.
• Read and follow all instructions and precautions on
chemical manufacturer' s label of chemicals used in
this fogger.
• Use the appropriate Personal Protective Equipment
(PPE) as recommended by the chemical
manufacturer and/or refer to the chemical Safety
Data Sheet (SDS) of the chemical being used. This
includes at least goggles, gloves, and protective
clothing. Failure to use appropriate PPE could result
in chemical exposure through skin contact, eye
contact, inhalation, or other means.
• After initial assembly, extended storage, or any
possibly damaging event, such as a fall, always
inspect the fogger for damage, and test it with
plain water to check for proper function. Ensure all
connections are secure and leak free, and the hose
is free from damage, prior to using the fogger with
chemical.
BEFORE YOU BEGIN
Calibrate the adjustment knob (1):
• The unit should be running while adjusting to
"zero-point".
• Turn the knob (1) clockwise until closed. Never use
tools to tighten.
• Push down on the lower portion (2) of the knob and
align the point with the groove on the nozzle.
• Release the lower portion (2) of the knob to set the
point.