Duronic Si2 Manual De Instrucciones página 8

• Do not turn the iron upside down; there may be hot water in the water
tank.
• Do not leave water in the water tank when not in use - this can corrode
and damage the soleplate.
• Water will drip out of the iron if the temperature dial is not set.
• Keep the appliance well away from surfaces and objects that can be
damaged by heat.
• Ensure there is adequate space to operate the iron.
• When not ironing, do not leave the iron face down. Stand it upright on its
heel, on a level heatproof surface.
• Use this iron only with a purpose-built ironing board.
• Observe all of the ironing instructions and ironing temperature dot settings
given by the garment manufacturer. These guidelines are normally on the
label/s inside the garment.
• Always ensure the water filling does not exceed the MAX mark.
• Always unplug the iron when refilling the water reservoir.
• Do not iron buttons or fasteners. This could damage the iron.
• During operation do not use when the light is on. When the light turns off
the iron has reached the correct temperature.
• Do not iron directly onto synthetic fabric - instead iron the fabric inside out
or with the synthetic fabric covered by other material to protect it.
8