Publicidad

Enlaces rápidos

BY THE PEOPLE FOR THE PEOPLE
USER MANUAL
20V MAX LITHIUM-ION
DRAIN AUGER KIT
CDAL-2004
WHAT'S IN THE BOX
Battery Pack
Battery Charger
Tool Bag
Please carefully read this user manual before operating the drain auger.
Made in China

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Populo CDAL-2004

  • Página 1 BY THE PEOPLE FOR THE PEOPLE USER MANUAL 20V MAX LITHIUM-ION DRAIN AUGER KIT CDAL-2004 WHAT’S IN THE BOX Battery Pack Battery Charger Tool Bag Please carefully read this user manual before operating the drain auger. Made in China...
  • Página 2: Electrical Safety Warnings

    Be sure to save these instructions and any other documents supplied with this unit for future reference. Note: Populo cordless tools are interchangeable for use in the United States and Canada. Note Note GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions.
  • Página 3: Drain Auger Safety Warnings

    GENERAL POWER TOOL SAFETY WARNINGS (CONT.) Power tool use and care used for its designed purpose. must be repaired. these instructions. Power tools are dangerous in the hands of untrained users. power tools. control. work to be performed. Use of the power tool for operations different from those intended could create a hazardous situation. Service properly and safely maintained.
  • Página 4 BATTERY PACK AND CHARGER SAFETY WARNINGS WARNING! This manual contains important safety and operating instru- citons for your battery pack and charger. Before using the charger, read all instructions and cautionary markings on the charger, battery pack and the product using the battery pack. shock or electrocution.
  • Página 5: Know Your Product

    KNOW YOUR PRODUCT SPECIFICATIONS Cable Length: 25ft 2. Cable 5. Forward and Reverse Lever 6. Variable Speed Trigger Battery Charger...
  • Página 6 UNPACK AND SET-UP BATTERY PACK AND CHARGING CAUTION: The charger for this product should be protected by a leakage current device (rated at 30mA or less). The purchased battery will be shipped in a low charge condition, and requires charging prior to use. Allow several cycles of charging and discharging (through use of the tool) for the battery to reach its optimum performance/runtime.
  • Página 7: Installing/Removing Battery Pack

    UNPACK AND SET-UP ( CONT.) INSTALLING/REMOVING BATTERY PACK Installing the Battery Pack Slide the battery into the drill base until it clicks into place. Removing the Battery Pack 1. Hold down the battery pack and release button. 2. Slide the battery pack out. CONTROLS Variable Speed Switch Trigger The variable speed switch trigger delivers higher speed with...
  • Página 8 UNPACK AND SET-UP ( CONT.) Arial CONTROLS Bold LED Work Light off automatically in a few seconds. 行间距10 NOTE: Use a clean cloth when wiping the lamp holder to avoid scratching which can reduce luminance. Advancing/Retracting the Cable To advance the cable manually: Center Lock Lock the switch trigger by placing the forward/reverse lever in center position.
  • Página 9 OPERATION WARNING! DO NOT allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. Using the Drain Auger NOTE: To clear obstrucitons: necessary to remove the stopper or overflow cover to gain access to the drain pipe.
  • Página 10: General Maintenance

    General Maintenance How to Replace the Cable • Please check if the battery pack is unplugged before replacing it. Populo 5. Push the cable manually to the inside of the drum. service center.
  • Página 11 MAINTENANCE (CONT.) Storage and Maintenance of the Machine rust. Note: person. Battery Protection System The output power automatically cuts off if the tool and/or battery gets overload or when the remaining battery capacity becomes low. Note: The battery protection system does not in any way damage the tool. Note: The indicated capacity may be lower than the actual level during use or immediately after using the tool.
  • Página 12 WARRANTY 30-DAY MONEY BACK GUARANTY 30 DAYS TO 90 DAYS (3 MONTHS) manufacturing fault. 90 DAYS TO 24 MONTHS WARNING! The following actions will result in the warranty becoming void. alterations support@populotools.com www.populotools.com HANGZHOU AVANT GLOBE ECOMMERCE CO., LTD 3F, Bldg 9, Xixi Xintiandi Commercial Center, Wenyi West Road, Hangzhou, Zhejiang, P.

Tabla de contenido