OPERATION (CONT.)
NOTICE:
CAUTION:
remove it slowly to avoid "Splash back".
CLEANING THE DRAIN AUGER
The drain auger should be cleaned after each use to prevent contamination and residue
build up.
To drain the drum:
• Remove the battery pack from the tool.
• Hold the tool at an angle and remove the drain port plug on the back of the drum with
allen wrench.
To clean the cable:
• Remove the battery pack from the tool.
advances. Continue until the cable has been fully advanced and completely cleaned.
until the cable has been fully retracted.
NOTICE:
MAINTENANCE
WARNING! When servicing, use only identical replacement parts. Use of
any other parts could create a hazard or cause product damage.
General Maintenance
How to Replace the Cable
• Please check if the battery pack is unplugged before replacing it. Populo
5. Push the cable manually to the inside of the drum.
service center.
WARNING:
3mm
Arial
Black
9pt
Arial
Arial
Bold
14pt