Using Your Mixer; Special Notes On Cord Plug; Care And Maintenance - Highland HM833D-UL Guia Del Usuario

USING YOUR MIXER

• For the first use, clean the dough hooks and beaters. Before assembling the mixer, be sure the
power cord is unplugged from the power outlet and the speed selector is on the OFF position.
• Assemble proper beaters or dough hooks into mixer.
Note: For the and dough hooks, the one with washer can only be inserted into the big socket
and the other one can only be inserted into small socket. The two dough hooks cannot be
inserted in reverse.
• Ensure that the unit is at the 0 setting, then plug in the power source.
• There are 6 settings. Turn the speed selector to your desired setting and the appliance will start
working. And the speed will increase 20% if the Turbo Button is pressed at any time.
Warning: Do not stick knife, metal spoons, fork and so on into bowl when operating.
• The max operation time per time shall not exceed 5 minutes, minimum 20 minutes rest time
must be maintained between continuous two cycles. When kneading yeast dough, we suggest
that the speed selector should be at low speed firstly and then use high speed to achieve the
best results.
• When mixing is completed, turn the speed selector to 0 position, unplug the cord from power
outlet.
• If necessary, you can scrape the excess food particles from the beaters or dough hooks by
rubber or wooden spatula.
• Hold the beaters/dough hooks with one hand and by pressing the Ejector button firmly down
with the other hand, remove the beater/dough hooks.
Note: Remove the beaters/dough hooks by pressing eject button only at the 0 setting.

SPECIAL NOTES ON CORD PLUG

This appliance has a polarized plug (one blade is wider than the other).To reduce the risk of
electric shock, the plug can fit into a polarized socket only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the
plug in any way.

CARE AND MAINTENANCE

• Unplug the appliance and wait till it completely cools down before cleaning.
• Wipe over the outside surface of the head with a dampened cloth and polish with a soft dry
cloth.
• Wipe any excess food particles from the power cord.
• Wash the beaters and dough hooks in warm soapy water and wipe dry. The beaters and dough
hooks may be washed in the dishwasher.
• Caution: The mixer cannot be immersed in water or other liquid.
4