Crivit Sports SP-33 Modo De Empleo página 14

dear Customer!
We are pleased that you have decided to purchase one of our
high-quality products, which are manufactured and certified in strict
adherence to the currently valid safety standards.
You will find some instructions for ensuring the full protective effect
of the helmet:
• Parents should make sure that their children take the helmet off
before entering a children's playground. The helmets must not be
used by children when climbing or playing other games in which
there is a danger of strangulation !!!
• Your helmet was developed specially for protection while cycling,
skateboarding and roller-skating. It must not be used for other
types of sport or for motorcycling.
• Please be aware that despite correct adjustment your helmet
cannot always protect you from all injuries.
1. ProPer handling and Care
• The helmet should be checked for visible deficiencies at regular intervals.
• The helmet must be replaced after every hard knock, impact or
deep scratch, because these cause it to lose its protective effect.
• Any adjustment to or removal of the original parts of the helmet
can extremely impair its protective function. The helmet may not
be altered in order to make additions in a way not recommended
by the manufacturer.
• All chemicals, paints and stickers can seriously impair the
protective effect of the helmet.
• Only clean your helmet with lukewarm water, mild soap and a soft cloth.
All manuals and user guides at all-guides.com
• After every use, leave your helmet exposed to the air in order
for it to dry.
• Clean the inner padding with lukewarm water and mild soap
and then let it air dry
• High temperatures, from as low as 60° C, can seriously
damage the helmet. Uneven helmet surfaces and the
formation of small blisters are signs of such damage. Do not
store behind panes of glass, e.g. in the car or close to sources of
heat or warmth.
• Please contact your local waste disposal company for the disposal
of the helmet.
2. the CorreCt helmet Position
Fig. 1a
• The helmet must always be levelly horizontal on your head.(Fig. 1a)
• If the helmet is too far forward, it can impair your vision.
• If the helmet is too far back, your forehead is not sufficiently
protected. (Fig. 1b)
Fig. 1b