For DCR-PC109/PC109E/PC108/PC108E/PC107/PC107E/PC106E
1
Remove the grip.
2
Unfasten 3 latches and open the marine pack.
Disconnect the monitor cord from the camera
mounting shoe G.
3
Take the camcorder out of the front shell.
Hold the camera mounting shoe by the knobs and
extract the camcorder.
When you open the marine pack, do not pull the
cords by force.
4
Disconnect the remote cord and the
microphone cord.
5
Disconnect the A/V connecting cable of
camera mounting shoe G from the A/V jack.
6
Remove the battery adaptor from the camcorder before removing the mounting shoe.
Also remove the battery attached to the rear of mounting shoe G.
7
Remove the batteries from the LCD monitor battery compartment and the battery case of
the grip.
GB
21
-GB