Power On/Off; Video Recording - WISEUP SHOP GL1000 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. The blue
indicator light will come on and stay illuminated, indicating the camera has entered
into standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds again. The
blue indicator light will flash twice and then turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation more
than 3 minutes.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. The blue
indicator light will come on and stay illuminated, indicating the camera has entered
into standby mode automatically.
3.2.2. Press the Video Recording Button once to start video recording. The blue indi-
cator light will flash 3 times and then turn off.
3.2.3. Press the Video Recording Button once again to stop video recording. The
blue indicator light will come on and stay illuminated, indicating the camera is back
to standby mode.
[Note]:
1). A video clip will be generated and saved every 3 minutes automatically.
2). The camera can record video for 80 minutes continuously on a full charge.
3). Video Resolution: 1920x1080P
Video Format: AVI
4). If the camera is in low battery, it will save all video files and then shut down automatically. The blue
indicator light will flash quickly for 3 seconds and then turn off.
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing the Power Button for 2 seconds. The blue
indicator light will come on and stay illuminated, indicating the camera has entered
into standby mode automatically.
3.3.2. Press the Camera Button once to take a photo. The blue indicator light will
flash once every time you take a photo.
3.4. MOTION DETECTION VIDEO RECORDING
3.4.1. Power on the camera by pressing the Power Button for 2 seconds. The blue
indicator light will come on and stay illuminated, indicating the camera has entered
into standby mode automatically.

Publicidad

Tabla de contenido
loading

Tabla de contenido