Fujitsu Airstage UTY-RNK Serie Manual De Funcionamiento página 5

G Room temperature setting
Lower Raise
G Fan speed setting
To set the operation mode
G Vertical airflow direction adjustment (Swing operation/Louvre position)
G Horizontal airflow direction adjustment (Swing operation/Louvre position)
Press the " SET TEMP.
temperature.
Temperature setting range
AUTO ............................................................ 18 to 30 °C
COOL/DRY .................................................... 18 to 30 °C
HEAT ............................................................. 10 to 30 °C*
* Room temperatures as low as 10 to 15 °C cannot be set depending on the model.
Press the " FAN" button to select the fan speed.
AUTO HIGH
* Press the "START / STOP" button to set the air conditioner in the operation mode.
Then, proceed with the following steps.
Press the " " button. The temperature display will change to the vertical airflow
direction setting display.
Press the " " button to change the vertical louvre position. The position number
will appear on the display.
Press and hold the " " button for 2 seconds or more to set the swing operation
ON or OFF.
The flashing display indicates that
the swing operation is OFF.
* Press the "START / STOP" button to set the air conditioner in the operation mode.
Then, proceed with the following steps.
Press the " " button. The temperature display will change to the horizontal air-
flow direction setting display.
Press the " " button to change the horizontal louvre position. The position
number will appear on the display.
Press and hold the " " button for 2 seconds or more to set the swing operation
ON or OFF.
The flashing display indicates that
the swing operation is OFF.
" button or " SET TEMP.
MED LOW
* It returns to the original indication of tem-
perature in 3 seconds after the operation
is completed.
* It returns to the original indication of tem-
perature in 3 seconds after the operation
is completed.
" button to set the room
En-4