Denver TCM-381 Manual De Instrucciones página 8

Selecting A Different Track During Play Selecting A Different Track During Play
In the CD playing mode: In the CD playing mode:
1. Press the SKIP(UP & DOWN) button or press "TEN" and "UNIT", the required track number
appears on the display. (F6)
2. Press the PLAY/PAUSE button . Starting with the track that is currently playing.
In the MP3 playing mode: In the MP3 playing mode:
1. Press the SKIP(UP & DOWN) button or press "HUNDRED" , "TEN" and "UNIT" directly to
select you wish to track number. (F7)
2. Press the PLAY / PAUSE button , to start playing the MP3 from the order track.(F8)
3. Repeat the above steps1 to 2, to select the other tracks that you wish to program.
Note : Using the SKIP (UP & DOWN) button to select the track, when playing the MP3. It will be easy
to error occurs. Switch the unit off for a few seconds, and then turn on it to restart playing the
MP3.
F6
HUNDRED BUTTON
You can select and enter the hundred numbers of the tracks directly, and only the number from 0 to 9
can be entered, and the number that has been selected flashing on the display (F9).
Note: the button is in effect only while using MP3 disc.
TEN BUTTON
You can select and enter the ten numbers of the tracks directly, and only the number from 0 to 9 can be
entered, and the number that has been selected flashing on the display. (F10) (F11)
All manuals and user guides at all-guides.com
MP3
F9
MP3
F10
UK-6
F7
F11
MP3
F8
MP3