Important Safety Precautions; Before Starting - PALSON Nilo Manual Del Usuario

GB

IMPORTANT SAFETY PRECAUTIONS

READ ALL THE INSTRUCTIONS BEFORE USING YOUR STEAM CLEANER.
WARNING
To reduce the risk of fire, electric shock or injuries:
1 Do not use outdoors.
2 Do not leave the steam cleaner unattended when it is plugged into the mains. Unplug the power cord when it
is not being used and before performing maintenance.
3 Do not allow it to be used as a toy. Pay particular attention when it is used near children, pets and plants.
4 Use only as described in this manual. Use only the attachments recommended by the manufacturer.
5 Do not use it with a damaged cord or plug. If the steam cleaner does not work properly, if it has been dropped
to the ground, if it has been damaged, left outside or has fallen into water, return to a service centre before use.
6 Do not pull or carry by the power cord. Do not use the power cord as a handle or pull on the cord, making it
rub against corners or sharp edges. Keep the power cord away from hot surfaces.
7 Do not use extension cables or sockets with the wrong current rating.
8 Do not pick it up using the power cord. To unplug, pull on the plug, not the cord.
9 Do not hold the plug or the steam cleaner with wet hands or operate with bare feet.
10 Do not place any object in the openings. Do not use with any opening obstructed.
11 Store your steam cleaner in a clean, dry place indoors.
12 Keep your working area well lit.
13 Never place the device upside down or on its side when using steam. Never aim the steam at people, animals,
plants or devices with electric components, such as the interior of ovens.
14 Do not immerse the steam cleaner in water or other fluids. Always unplug the power cord from the socket
before filling the steam cleaner.
15 Never place detergents, alcohol-containing products, aromatic products or descaling products in the steam
cleaner, as this may damage it or make it unsafe for use.
16 Do not operate it without the safety cover installed.
17 Before filling, if the cleaner has run completely out of water, see paragraph 8 of the information.
18 Metal tips or injectors will heat during use. Do not touch the hot surfaces. Allow the attachments to cool before
changing them during use of the device.
19 This device is for domestic use only.
20 Any repair, including changing the power cord, must be carried out by a qualified technician. Call your nearest
service centre.
21 If the power cord becomes damaged, it must by replaced by the manufacturer, your aftersale service or similar
qualified personnel in order to prevent hazards.
KEEP THESE INSTRUCTIONS

BEFORE STARTING

Check the voltage rating.
First of all, check the voltage rating on the nameplate to make sure that the cleaner has the right voltage for your
mains supply. If it does not, do not use the cleaner and consult your distributor.
WARNING: If the power cord should become damaged during cleaning, you should do the following:
- Remove the plug from the socket.
- Examine the damage to the power cord (only after removing the plug from the socket).
- NEVER use the machine with a damaged power cord or power supply.
Thermal cutout
This steam cleaner has a special thermostat that protects it against overheating. If the cleaner suddenly cuts out,
press the injector button once and unplug the cleaner. Check the cleaner for the cause of the overheating, such as
no water in the water container. If you find the cause, solve it and wait at least 30 minutes before trying to use the
cleaner. After the 30 minutes have elapsed, replug the cleaner and turn on the power switch. If the cleaner does not
heat, contact your nearest authorised service centre.
10
All manuals and user guides at all-guides.com