Names And Functions; Remote Controller Specifications; Performance Features; Introduction Of Function Buttons On The Remote Controller - Daitsu CS259-R Manual De Funcionamiento

Remote Controller Specifications

Model
Rated Voltage
Lowets Voltage of CPU Emitting Signal
Reaching Distance Signal Range
Environment
Performance Feature
1. Operating Mode: COOL, HEAT, DRY, FAN and AUTO.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range: 17ºC~30ºC. (63ºF~86ºF).
4. LCD (Liquid Crystal Display) of all functions.
5. Control function of charactron tube.

Introduction of Function Buttons on the Remote Controller

SET TEMPERATURE ( ºC / F )
AUTO
COOL
DRY
HEAT
TEMP
1
ON/OFF
MODE
2
FAN
SPEED
8
RESET
3
Fig. 1
8-
FAN SPEED Button: This button is used for setting Fan
Speed in the sequence that goes from AUTO LOW MED
to HIGH, then back to Auto.
9-
TEMP Button L : Push the button to increase the indoor
temperature setting.
12

NAMES AND FUNCTIONS

R51H, R51H/C
3.0 V
2.0 V
8 m
-5ºC 60ºC (-41ºF~140ºF)
FAN
HIGH
MED
LOW
9
7
TIMER
ON
5
TIMER
OFF
6
LOCK
4
1-
TEMP Button M : Push the button to decrease the indoor
temperature setting.
2-
MODE Select Button: Each time you push the button, a
mode is selected in a sequence that goes from AUTO
COOL DRY HEAT and FAN, as the following figure:
AUTO COOL
NOTE: HEAT only for Heat Pump.
3-
RESET Button: When the RESET button is pushed, all of
the current settings are cancelled and the control will
return to the initial settings.
4-
LOCK Button: Push this button to lock in all the current
settings. To release settings, push again.
5-
TIMER ON Button: Press this button to preset the time
ON(start to operate). Each press will increase the time ON
setting in 30 minutes increments. When the setting time
displays 10:00, each press will increase the time ON set-
ting in 60 minutes increments. To cancel the time ON pro-
gram, simply adjust the time ON to 0:00.
6-
TIMER OFF Button: Press this button to preset the time
OFF (turn off the operation). Each press will increase the
time OFF setting in 30 minutes increments. When the set-
ting time displays 10:00, each press will increase the time
OFF setting in 60 minutes increments. To cancel the time
OFF program, simply adjust the time OFF to 0:00
7-
ON/OFF Button: Push this button to start the unit opera-
tion, push the button again to stop the unit operation.
DRY HEAT FAN