Getting Started; Connections - Gear4music SDP-3 Manual Del Usuario

GETTING STARTED

POWER
After safely connecting the supplied power supply
firstly to the piano and then the mains, turn on the
piano by pressing the POWER switch. The display
will light up.
AUTO POWER OFF
The unit will Auto Power Off after 30 minutes of no
operation, except when playing demo songs.
SETTING THE VOLUME
It is advised to set the [MASTER VOLUME] to "MIN"
when powering on the piano, and then adjust the
volume to your desired level when playing.

CONNECTIONS

USING HEADPHONES
The SDP-3 has a 1/4" output jack (PHONES) for
connecting standard stereo headphones. The
output volume level is controlled using the main
master volume wheel. The internal speaker system
is automatically muted when a pair of headphones
is plugged into the PHONES jack.
USING AN EXTERNAL SOUND SYSTEM
The LINE OUT (R) and (L)(MONO) phono sockets
can be used to connect the piano to an external
sound system, such as a keyboard amplifier, inter-
face, or mixer. When using one cable (for mono
output), insert your cable into the (L)(MONO) out-
put. Connecting two cables sends separate left and
right audio signals down each cable, giving you
stereo output.
AUX INPUT
The Aux Input 3.5mm jack allows you to mix an
external sound source (such as a smartphone or
MP3 player) with the piano's internal sounds, for
playback through the piano's in-built speakers or
headphone output. The volume of the Aux Input is
controlled by the external sound source.
MASTER VOLUME
MASTER VOLUME
MIN
MIN
8
L
USB DISK
SONG
L
USB DISK
SONG
MAX
MAX
OVERDRIVE
AUX IN
0 10
INPUT GAIN LOW MID HIGH GA-15 VOLUME
OVERDRIVE
AUX IN
INPUT 0 GAIN 10 LOW MID HIGH GA-15 VOLUME