Connecting A Pair Of Headphones; Connecting An Audio Output; Connecting An Aux Input; Midi Output - Gear4music SDP-3 Manual Del Usuario

MIDI OUTPUT

Use this output to transfer MIDI data, including
note and touch velocity, via a 5-pin MIDI cable (not
included).

USING USB MIDI

The SDP-3 allows the transfer of MIDI via USB from
the piano to an audio interface or "host." Use the
audio interface to control the MIDI signal.
SUSTAIN PEDAL
The foot pedal included with your digital piano
can be connected to the SUSTAIN input and, when
SUSTAIN
held down, allows the sound of the notes played to
decay slowly, or "sustain." A piano-style foot pedal
may also be used. The sustain input will auto-detect
the polarity of the sustain pedal used. Ensure the
piano is turned off before connecting the pedal,
otherwise it may not be recognised by the piano
correctly. To change the polarity of the pedal, hold
the foot pedal down during power up.
USING DC POWER INPUT
The power input is used to connect the piano to
mains power. Only use the included power supply
unit (PSU).

USING BATTERY POWER

Ensure all batteries are inserted correctly, as indi-
cated by the +/- polarity markings. Replace all the
batteries at the same time. Do not combine old and
new batteries and do not mix battery types, as this
can cause overheating, fire, or battery fluid leakage.
Remove the batteries from the instrument if it is not
to be used for a long period of time.
9