(DVI Mode)
Problems
Current Status
LED ON
LED OFF
No Picture
LED displays
amber color
Abnormal
No sound, or
Sound
sound level is too
low
Remedy
• Using OSD, adjust brightness and contrast
to maximum or reset to their default
settings.
• Check the power switch.
• Verify that the AC power cord is properly
connected to the monitor.
• Verify that the video signal cable is properly
connected to the monitor.
• Verify that the power to the host PC is ON
• Verify that the audio cable is connected to
both the monitor and the host PC.
• Check to see if the volume setup of the
host PC is in the minimum position and try
to raise the volume level.
User's Manual
17