Trevi CR 410 Manual Del Usuario página 5

CR 410
pressed.
3. Adjust the microphone sensitivity with
the VOLUME/VAS SENS control until the
sound source level just activates the unit.
TAPE PLAYBACK
To listen to your recorded cassette, rewind to
the starting point and press STOP. Press play
and adjust the VOLUME control to the
desired listening level.
NOTE: A tape must be played back at the
same speed used to record it.
TAPE ERASE:
To erase a tape, simply record over the
unwanted recording.
EARPHONE JACK:
When you plug your earphones (not
included) into the EARPONE jack, the built-in
speaker is automatically disconnected.
MICROPHONE JACK:
When you plug your own external
microphone (not included) into the MIC jack,
the built-in microphone is automatically
disconnected.
CHANGING BATTERIES:
Slide open the battery compartment on the
back of the unit. Insert 2 AA batteries,
following the polarities indicated inside the
chamber, replace the battery compartment
door.
NOTE: REMOVE THE BATTERIES IF
THE UNIT WILL NOT BE USED
FOR MORE THAN 30 DAYS. USE
ALKALINE BATTERIES FOR
LONGER LIFE.
All manuals and user guides at all-guides.com
NOTEMANAGER
p.5
ENGLISH