Where To Find More Information - Intermec AC6 Instrucciones

All manuals and user guides at all-guides.com
Understanding the Status Light
Color
Steady green
Slow flashing
green
Fast flashing
green
Flashing red
Steady red
No light
Specifications
Electrical requirements: 2-bay charger
Operating temperature: 0°C to 35°C (32°F to 95°F)
Storage temperature:
Relative humidity:

Where to Find More Information

Go to the Intermec web site at
manuals as PDF files. If you have any problems, please visit
our Product Support web site at
1-800-755-5505.
Description
Battery is fully charged.
Battery is quick charging. Quick charging occurs for the first
hour that the battery is in the charger. After 1 hour, the
battery is charged to approximately 75% capacity.
Battery is charging. A fully discharged battery charges to
100% capacity in approximately 3 hours.
The battery temperature is too cold or too hot for the battery
to charge. Make sure that the temperature is from 0°C to
3 95
5°C (32°F to
The battery is not charging, because the battery is faulty.
Replace the battery.
The charger is not operating. Make sure that the:
• battery is correctly inserted in the charger.
• power supply is properly connected to the charger and an
AC outlet.
• battery contacts are clean. To clean the contacts, rub
them with a pencil eraser and remove any eraser debris.
°F).
4-bay charger
8-bay charger
-30°C to 70°C (-22°F to 158°F)
0% to 95% non-condensing
www.intermec.com
intermec.custhelp.com
x 12 V, 1.5 A
x 12 V, 2.4 A
x 12 V, 4.15 A
to find
or call
5