Low Battery; Measuring Station; Care And Maintenance - Hama TS39H Instrucciones De Uso

6.2. Channel selection/additional measuring stations
Note
• When doing so, ensure the same channel setting on the base station
and each measuring station. Suitable base stations can be found at
www.hama.com
• The transmitter channel of the supplied measuring station can be
changed/set (CH1, CH2, CH3).
• The measuring station is suitable for the following base stations:
186380, 186412

6.3. Low battery

Measuring station

If the batteries need to be replaced, the icon for the low battery level appears
next to the outside temperature indicator of the base device
the battery immediately.
Note - Changing the batteries
• Be aware that, after every battery change on the measuring station or
base station, the stations will need to be resynchronised.
• To do this, remove the batteries from the other station and re-insert
them or change them completely if required.

7. Care and maintenance

• Only clean this product with a slightly damp, lint-free cloth and do not use
aggressive cleaning agents.
• Ensure that no water is able to enter the product.
8
. Change