Johnson Health Tech Matrix R50XR Manual De Instrucciones página 50

MAINTENANCE
WHAT KIND OF ROUTINE
MAINTENANCE IS REQUIRED?
Minimal maintenance and cleaning is
required. Adhering to this schedule will
extend the life of your machine.
We use sealed bearings throughout our
bikes so lubrication is not needed. The most
important maintenance step is to simply wipe
your perspiration off the bike after each use.
HOW DO I CLEAN MY BIKE?
Clean with soap and water cleaners only. Never use
solvents on plastic parts. Cleanliness of your bike and
its operating environment will keep maintenance
problems and service calls to a minimum. For
this reason, we recommend that the following
preventive maintenance schedule be followed.
WARNING
To remove power from the bike, the power cord
must be disconnected from the wall outlet.
50
MAINTENANCE SCHEDULE
ACTION
After each use:
• Turn off the bike by unplugging the
power cord from the wall outlet
• Wipe down the bike with a damp
cloth. Never use solvents, as they
can cause damage to the bike.
• Inspect the power cord. If the power
cord is damaged, reference contact
information on the back cover of the
INFORMATION CARD for a replacement.
• Make sure the power cord is not
underneath the bike or in any other area
where it can become pinched or cut.
Clean underneath the bike, following these steps:
• Turn off the bike.
• Unplug the power adapter from the bike.
• Move the bike to a different location.
• Wipe or vacuum any dust particles
or other objects that may have
accumulated underneath the bike.
• Return the bike to its previous location.
• Inspect and tighten all assembly
bolts and pedals on the machine.
• Clean any debris off of the seat guide rail.
FREQUENCY
DAILY
WEEKLY
MONTHLY